What causes the sealing machine’s temperature to get out of control? Why do packaging materials end up with wrinkles? How should maintenance be performed?
Release time:
2022-10-24
Shrink-wrap machines are primarily used for the automatic packaging of materials such as food, pharmaceuticals, chemicals, and plant seeds. So, what are the common malfunctions that occur when the shrink-wrap machine’s shrinking temperature gets out of control? Lin Bin, a manufacturer of shrink-wrap machines, has summarized the main causes of uncontrolled shrinking temperatures in these machines.
Plastic sealing machine What causes temperature to get out of control? Why do packaging materials wrinkle? How should maintenance be performed?

Shrink-wrap machines are primarily used for the automatic packaging of materials such as food, pharmaceuticals, chemicals, and plant seeds. So, what are the common malfunctions that occur when the shrink-wrap machine’s shrinking temperature gets out of control? Lin Bin, a manufacturer of shrink-wrap machines, has summarized the main causes of uncontrolled shrinking temperatures in these machines.
The sealing machine is experiencing a malfunction: the thermometer shows an error, the temperature cannot be controlled, the heat-sealing temperature is unstable, shrinkage is uneven, and the seals are not tight—resulting in an unsightly appearance.
The primary cause of the shrink-sealing machine’s temperature control malfunction is a faulty thermometer, which needs to be repaired. The thermocouple might also be defective and unable to properly transmit the sensed temperature to the thermometer. Replace the thermocouple with one of the same model and specifications.
The mechanical cause of uncontrolled shrinkage temperature in a sealing machine is uneven heat-sealing pressure. Simply adjust the pressure spring of the heat-sealing blade to ensure consistent pressure. At the same time, the contact surface of the heat-sealing blade should be kept clean and free of any dirt or debris.
Plastic sealing machine Another reason for uncontrolled shrinkage temperature is the poor heat-sealing quality of the composite material itself, which leads to variations in the heat-sealing coefficient and, consequently, inconsistent temperatures.
The automatic sealing machine consists of a sealing and cutting unit and a shrinking machine, enabling it to complete both the sealing and shrinking processes. Gradually, it has become widely adopted in the market, bringing new vitality to our daily lives and making packaging more refined, aesthetically pleasing, and accessible to the general public. However, with prolonged use, packaging wrinkles are bound to occur. Below are some methods to avoid this issue.
1. Insufficient shrinkage temperature. Solution: Increase the temperature (if there are wrinkles on the upper surface, raise the heating temperature at the upper section; conversely, lower the heating temperature). If the temperature is already sufficiently high, try to slow down the conveyor belt speed so that the product has more time to shrink inside the tunnel, which will enhance the actual shrinkage effect.
2. Is the heat-shrink film of poor quality? Even if the above-mentioned solutions still fail to resolve the issue of packaging wrinkles in the automatic sealing machine, if the shrinkage rate is low and the film lacks sufficient flexibility, you’ll simply have to switch to a higher-quality heat-shrink film.
3. If the above-mentioned issues persist—that is, the automatic sealing machine has aged, or the equipment being used is substandard, the temperature in the heating tunnel is uneven, or the hot-air flow rate is too low—replace it with a high-quality sealing machine.
Plastic sealing machine The daily maintenance is as follows.
1. Regularly check whether all components of the packaging machine are in good condition—for example, ensure that the vacuum pump of a vacuum packaging machine is functioning properly and that the vacuum pump motor is not rotating in the reverse direction.
2. Regularly check the oil level of the sealing machine. The normal oil level should be between 1/2 and 3/4 of the oil window (do not exceed this range). If the vacuum pump oil turns black, it’s time to replace it with fresh oil. Typically, the oil should be changed every 1 to 2 months of continuous operation.
3. The impurity filter needs to be frequently disassembled and cleaned (generally every 1-2 months; if there’s a lot of packaging debris, the cleaning interval should be shortened).
4. After operating continuously for 2-3 months, depending on usage conditions, you need to open the rear cover 30, lubricate the sliding parts and switch protrusions, and lubricate the connection points of the heating rod.
5. The heating strip and silicone strip should be kept clean and free of foreign objects to avoid compromising the sealing quality.
6. On the heating rod, the second layer of adhesive beneath the heating film acts as an insulating material. If it becomes damaged, it should be replaced promptly to prevent short circuits.
6. The user should prepare the working air source and the expansion air source. The vacuum packaging machine operates at a pressure of 0.3 MPa; unless there are special circumstances, do not adjust the pressure too significantly.
7. The sealing machine must be equipped with a reliable grounding device during installation. During transportation, it must not be tilted or subjected to impacts, and it must not be laid down during transit.
8. Before powering on during work, ensure adequate ventilation. When shutting down, first turn off the power supply and then turn off the main power switch. In case of an emergency, immediately turn off the power supply.
Other Blogs
Compared to the Chinese market, Russia’s paper packaging industry has been developing rapidly, driven by steady growth in the domestic consumer market and the continuous commissioning of new production facilities. According to recently released Russian data, Russia’s annual total output of paper packaging is approximately 5.1 million tons, accounting for roughly 57% of the entire packaging industry...
Compared to the Chinese market, Russia’s paper packaging industry has been developing rapidly, driven by steady growth in the domestic consumer market and the continuous commissioning of new production facilities. According to recently released Russian data, Russia’s annual total output of paper packaging is approximately 5.1 million tons, accounting for roughly 57% of the entire packaging industry...
A Brief Discussion on the Second Reason for Insecure Sealing in Packaging Machines
The inability to seal properly is also related to the quality of the heat-sealing film. If the corona treatment on the composite liner is uneven and ineffective, and happens to occur precisely at the sealing area, the seal will definitely fail. Although this situation is rare, once it occurs, the product is inevitably scrapped. Therefore, in the color-printed packaging industry, this is a problem that must be addressed by the next stage...
Compared to the Chinese market, Russia’s paper packaging industry has been developing rapidly, driven by steady growth in the domestic consumer market and the continuous commissioning of new production facilities. According to recently released Russian data, Russia’s annual total output of paper packaging is approximately 5.1 million tons, accounting for roughly 57% of the entire packaging industry...